Caulk crown molding before or after painting

If you are going to paint the crown molding, I would prime it prior to hanging, then hang the molding. once it is hung, calk every joint, nail hole, and the whole top and bottom. use a high-end clear calk. 40year+. when you put on the calk, have a damp sponge to wipe and smooth the calk bead. when I paint crown molding, I usually paint it at a slightly higher gloss than the ceiling. lots more cutting but worth it And, there's no way you can really avoid getting caulk on the ceiling so you'll be painting anyway. In the end, painting after you install crown molding —and most other moldings—will make you and your molding the happiest. There is one place that pre-painting does make sense, however, and that's shoe molding The thing about caulking is that if you caulk after it has been painted, dirt will penetrate the caulk a lot more than the painted trim so it will discolor. Same goes for smoke if you are a smoker. If you have painted over the caulk it won't do that See more at http://millionairemaintenanceman.com and learn how to become financially free buying distressed homes and renovating them. Discover the secrets t.. If you want to improve the overall appearance of a paint job, it's a good idea to caulk between the walls and trim moldings to fill any gaps before applying the finish paint. Take care when choosing your caulk to use a paint-able acrylic latex or silicone enhanced acrylic

Caulking Crown Mouldings - When? - Fine Homebuildin

Gap by crown molding should be caulked. After crown molding is installed, it is caulked at the top and bottom, to hide the gap. Occasionally, this may need to be recaulked. If your current crown molding is white, you may not need to touch up the area with paint after the caulk is applied Caulk takes about 24 hours to fully cure before painting, but you should wait a week after applying any sealant or primer before starting your painting project. Otherwise, you risk trapping moisture in between layers of paint that will lead to peeling and bubbling later on down the line. What happens if you paint caulk too soon If your walls are new and have never been painted, you must paint them prior to installing crown molding. Use a primer suitable as the first coat on drywall, wait for it to dry, then apply a coat.. Under normal circumstances, you can apply caulk before priming; however, if you're working on certain surfaces, the caulk will not stick without a primer base coat. Caulk adheres very well to clean, bare wood and vinyl. Unfortunately, it will not stick well to stained surfaces

The caulk will stick to the primed area because it is clean and uniform, unlike the existing coat of paint. Use a caulking gun to carefully apply a paintable brand of caulk to the gaps between your molding and your wall and/or ceiling. Once the caulk has been applied, gently smooth it out Sometimes that means regular rounds of seasonal caulking. That said, here is a post that deals with the primary reason crown moldings separate at the joints: Why I Don't Install One-Piece Crown Moldings. When I have a crown molding joint that opens up each season, I'll use a caulk with higher silicone content like DAP's Dynaflex 230 I know, Scary, but with a little caulk and light weight spackle, no one will ever know. OK I guess everyone who sees these pics will know, but you get the idea. Start by caulking the molding as per usual, and include a bead of caulk in the gap. This will stabilize the molding For crown molding cracking from ceilings, a thin bead of caulk between the crown molding and the ceiling can create a professional, finished appearance and hide any cracks or gaps In this video I discuss my tips and tricks for caulking crown molding. I show what caulk I use, and how to keep caulk off my hands when smoothing it

Ask it: Should I paint before I install crown molding

Paint Crown Molding Before or After Installation? DIY

How to Caulk and Paint Crown Molding - YouTub

Step 3: Cut your caulking tube at an angle. You will need to cut off the tip of the caulking tube in order for your caulk to come out. There will usually be a small guide on the tip: 1/8″, 1/4″, 5/16″. This is to help you decide how much of the tip to cut off. I recommend starting with the smallest tip 1/8″ It is much faster to cut the perimeter tiles if you do not have to measure them exactly as it is in the case of installing the Crown Molding before. 2. Depending on the design of your tiles, large gaps may be created after you install the Crown molding over the tiles After piercing the caulk tube nozzle, run a long, steady bead of caulking along the gap. To smooth the caulk, dip your finger in the water bowl and run your finger along the caulking bead. Smooth the Caulk and Clean u Painting the molding in advance goes very quickly but after you install the molding there will be areas like the nail holes and corners where you will need to go back and touch up paint. If you wait until after you install to do the painting then you will have a lot of trips up and down a ladder and you will have to tape of your ceiling and wall

You can finish (paint or faux finish) crown molding before or after installation. After installation touch-up areas as needed. Place crown molding in room for 48 to 72 hours before installation to allow molding to adjust to room temperature and humidity levels of the room Surface Preparation for Crown Molding Installatio Do You Caulk The Crown Molding Before Or After Painting? The answer to this question depends on your situation. For new construction and thorough remodel, it is much easier to caulk before you paint. That way, there is no need for taping, and any caulking run-over can easily be painted to match Son says no, paint molding after it is up all at once. Help. you are right. Paint first. The east way to do it is to paint all the moldings first, before cutting it to length. Then, touch up the ends with a fairly dry brush after you make your cuts, but before nailing it in place Where the molding has an outside CORNER then the parallel surface to the wall is the one that gets the tape stuck to it because there's a nice crisp edge there, and the perpendicular one gets painted the wall paint..baseboard and ceiling both treated the same With crown molding though, I'd plan on a lightweight spackle. and you can use a damp cloth to smooth it over after 15 mins and paint in half an hour. Caulk tend to be a bit messy on small nail holes, This. I usually use Alex 2 with a caulk gun, but have used the squeeze tube stuff before as well. - Zach Dec 9 '11 at 17:58

How to Caulk Trim Molding Before Painting - Do-it-yourself

I paint walls/ceiling first. If using crown, process goes quick as you dont have to cut in the ceiling/wall. Once painting all done. I install all the trim/crown (all pre-painted/or stained). Then I caulk the crown in and do all the touch up. Never have to tape or cut in. Been doing this for decades before or after I painted it. If you cut it to fit first, make sure Wrong! Install the molding, caulk, fill the nail holes, prime and paint it with the ceiling. Then install the wallpaper and cut it tight against the > will have to caulk (and then paint the same color as the crown > moulding). My question is..

Should crown molding be painted first

  1. You can use caulk to fill nail holes in painted trim, but caulk tends to be messier and shrinks more than wood filler, and it can't be sanded smooth like filler can. If you use caulk, make sure it is labeled as paintable, and don't leave a smear on the wood surface, which might show up after painting
  2. After reading a recent thread I noticed some of you might be caulking wood to wall when the wood is natural/stain-grade. Now, I am not the caulk police, but the only time I'd ever consider filling a gap from a wall or ceiling to stain-grade trim is if there were massive gaps and the customer has made a special request
  3. After crown molding installation, there is usually a large gap between the crown molding and the wall or ceiling. Latex caulk is a good way to fill these gaps. Spread a bead of caulk along the gap with a caulk gun. Smooth the caulk with your finger and let the caulk dry overnight
  4. When painting indoors, painter's caulk is mostly important for aesthetic reasons. It provides a smooth, gap-filling bond that adds a professional look on wall joints, baseboards, and crown molding. Paintable caulk is also used for countertops and other wooden trim. Without sealing the joints, the finished work would look ridged
  5. ** I should mention that Dap has an interesting caulking instruction sheet too, but after 10 years of caulking experience, I have my own way of doing things, and it works so I am happy with it. The best thing about caulk it that if you are not yet totally skilled in molding installation, for example, caulk- DONE RIGHT, can make it look like you.
  6. Do You Caulk Crown Molding Before Or After Painting? You'll want to caulk before painting. If you paint beforehand, you'll run into some problems. First, the paint will go into gaps and can dry concave instead of firm and flat. Second, you'll still need to caulk, so you'll be doing the painting job twice. This way of finishing crown.

Always paint two coats. Paint the crown molding first, then ceiling and then walls. Apply a unifying coat of primer, even to pre-primed crown. Use good paint like Benjamin Moore Satin Impervo. Use a paint leveler/extender to increase your working time with the paint and remove brush strokes. Use good brushes like Purdy or Wooster And there is - just run a tidy bead of caulk along all edges to create a smooth path for the brush to glide on (corners under the ceiling, around door and window trim, along baseboards, chair rail and crown molding) and see how much easier and faster it is to cut in The look of crown molding can easily be mimicked by using picture molding. This thin, wooden molding is normally used to divide a wall through a two-toned look. Picture molding is cheaper than crown molding and to create the same look as crown molding, you simply paint the picture molding white before attaching it to where the wall meets the.

1. Decide whether you want to paint or varnish your crown molding before or after installing it. If you think you will have a difficult time reaching all areas of the molding after installing it, paint the pieces before hanging them. If you will have joints in the middle of your wall, painting after installation can help make them less prominent If you have to remove the old caulk, begin by laying a drop cloth on the floor, then use a razor knife to cut the old caulk out. Be careful not to cut into the drywall or the crown molding itself. Once the caulking is out, you're ready to add new caulk. If you haven't caulked before, a word of caution: apply a minimal amount of caulk when. Paint cracking over caulk - Why? And how to solve it The cracking of caulk has been a common topic on The Decorators Forum UK over the last few years and decorators are always on the hunt for a caulk that 'doesn't crack'. After a hell of a lot of research and some personal experiments I thought I would share my findings after getting to the bottom of this problem Caulk Between Woodwork and Walls. Apply a thin bead of paintable acrylic latex caulk only inside the crack where wood meets a wall for a smooth, professional appearance. Remove extra caulk with a putty knife. Pro Tip: Buy a dripless caulk gun to save time and frustration. Cut the tip smaller than you think you need Re: caulk and crown molding. « Reply #3 on: April 18, 2015, 10:21 AM ». Most of us - including myself - actually probably are caulking wrong. We apply caulk and then wipe it with a finger, thumb, sponge, etc. This causes the caulk to adhere at more than the edges

Do I Caulk or Paint First? Pros & Cons Explained The Tool

  1. Caulk does not need to be primed before painting. Not all caulk is paintable, and the caulk must be fully cured before painting. Latex and specially made paintable silicone caulks do not need to be primed. Normal silicone caulk cannot be painted and must be covered or replaced with a paintable caulk. Butyl-rubber caulk does not require.
  2. STEP 2: Prep the baseboards with painter's tape. If there's any existing caulk, remove as much of it as possible; a putty knife, 5-in-1 tool, or wire brush can help dislodge the old stuff. Run.
  3. Caulk is great for. On the other hand, caulk is terrible for filling nail holes and other holes in wood because over time it will shrink and cause a divot. And wood filler is a terrible choice for filling gaps in trim - it would take forever to apply and sand. But either one in the right situation can be magical
  4. While crown molding alternatives such as the peel and stick options are a cheap option, the quality they offer does not escape compromises. If you want something inexpensive, yet of the same visual quality as the genuine article, the polyurethane foam strips are your best choice. They closely resemble wood and are available in several designs
  5. Before You Begin: Choose the Right Molding. Home centers offer a variety of premilled molding materials. For the traditionalist, or if you plan to stain the trim, solid-wood trim available in many species is the best choice, albeit a more expensive one. If paint will cover your molding, consider finger-jointed wood, wood composite, or urethane.
  6. g! I used Alex Flex caulk because it said it's the best for molding and trim, but I'm not a caulk expert (bummer!), so I don't know if this more expensive caulk was truly necessary. After caulking and pri
  7. Tip: It saves time to paint the crown molding before installing and then just touch up paint after it is installed and chalked. A few things to understand that will aid the process: There are a top and a bottom to crown molding. Caulk the seam between the molding and the ceiling

Before drying, they can be easily removed with soap and water. After the caulk has dried, it will need to be cut or scraped away. Where can I use DAP® ALEX® acrylic latex caulks? DAP® ALEX® acrylic latex caulks are ideal for filling and sealing gaps and cracks around window and door frames, molding, trim, baseboards, corner joints, and more Tile caulk vs. grout. The grout is utilized to fill the joints between the tiles. On the other hand, caulk could seal seams in various spots, such as crown molding, baseboards, or windows to hinder drafts and leaks. It functions flawlessly even if two building materials meet and on outdoor concrete. This fact proves that it is more versatile Looks fantastic. Love love love crown molding! And love the contrast of the wall color against it. When we moved into this house ALL the walls were white. The ENTIRE house has crown molding, but you couldn't even see it. Painting it made me giddy. Now it pops! <3. Reply Delet Any gaps less than 1/4 inch can be easily filled with painter's caulk after the trim is installed and touched up with the wall color. The drywall contractor can't make it perfect, so buy a few tubes of Alex Painters Caulk and finish it off real nice after the walls are painted, trim installed, in that order. Good luck Because caulk is designed to seal long gaps, you generally apply it in a continuous bead with a caulking gun in a two-step process. The first step is to apply the bead, and the second is to tool it by running your finger along it to create a convex surface. After that, you allow the caulk to dry. If it isn't silicone, you can paint it

Truthfully, you can either paint baseboards before OR after installation. Painting them beforehand may be easier because you can put them up on a saw horse or table, versus climbing around on the floor to paint them after they're installed. If you paint them before you install them, you will need to do touch ups after installation ALEX FLEX ® Premium Molding & Trim Acrylic Latex Siliconized Sealant. High-performance sealant specifically formulated for use on molding and trim applications. WHERE TO BUY. VIEW PRODUCT. ALEX ® Painter's Acrylic Latex Caulk. Paintable, all purpose caulk that applies smoothly and easily to a variety of surfaces Also, if you are painting your tiles before installing them and the color is blue for example, unless your caulk is tinted to that specific color you will have to paint the caulk with a brush to match, after the tiles are up and the caulking is dry ( this process is not really hard at all, just make sure to mix the paint with little bit of. Caulk the edges: Add caulking to the crown molding's bottom and top edges. Then, fill in all the nail holes using wood putty. Paint: Apply a high-gloss latex paint to the crown molding. Installing Peel and Stick. Peel-and-stick molding is perhaps the easiest installation method of all. It's also light, durable and is an excellent option for.

Crown Molding. At Masterpiece Painting we know that Crown molding is the perfect way to beautify your home and even bring unity from one room to another. It is one of the finishing touches that really sets a room apart. If you want your home to exude class and a great sense of style, Crown Molding is a great way to show your taste But painting it in place might take an hour or two for two coats since you have to be more careful not to get any on the walls or ceiling (spraying it before gets all of those tight spots on the top and bottom of the molding, so you only have to worry about doing the middle caulked parts by hand (there's less fear of getting paint where you. Your crown molding is a classy but ornate touch. While it's great to have in a master bedroom, you don't want it to be the focus of the room.Instead, it gives the room an elegant feel overall. This guide includes tips on choosing your paint color to make crown molding shine. You'll want a glossier paint then your walls, so if the walls are eggshell, get satin or semi-gloss paint

Do You Paint the Walls Prior to Installing Crown Molding

  1. If your current caulk is white, you may not need to touch the area up with paint after the caulk is applied. However, if the crown molding is a different color and the caulk was painted, you'll need to make sure that you use a paintable silicone caulk. If you have to remove the old caulk, begin by laying a drop cloth on the floor, then use a.
  2. The layout, location, style and finish appearance of ALL materials used in Crown Molding Painting will be approved by owner, before any work begins There will be no gap of more than 1/16 inch wide where the enamel paint meets adjacent surfaces; a gap (in no cases wider that 1/16 inch) can be hidden by: __scribing __a smooth bead of caulk.
  3. Watch video of this step. Before installing crown molding, test fit a piece of molding in place (Image 1), and mark the height of the molding where it meets the wall below the ceiling. Use a level, or laser level, to extend this mark along the walls from corner to corner (Image 2). Use an electronic stud finder to mark all wall studs and.
  4. However, if you're looking to redo all the crown molding and the baseboards and everything in the entire house, it's going to be much pricier. That said, the estimated total cost of supplies for installing and painting crown molding is: $225 - $600
  5. One of the best exterior caulk for bricks available today is the Red Devil Acrylic Latex. It offers an abundance of durability and versatility packed in a cylindrical, plastic cartridge. The Red Devil Acrylic Latex caulk is currently available in two different packaging sizes that include; 10.1oz and 5.5oz

Do You Prime Before Caulking or Caulk Before You Prime

BOB: It's actually, I guess, the caulk or the paint between the ceiling and crown moulding. TOM: It's probably the paint and the solution is the caulk. Because what happens is the walls expand and contract and if it's just painted there's going to be a seam that forms there. What you want to do is the next time that happens hit it with. When you decide to paint a room, don't forget to paint crown molding. Because painting crown molding is a good way to give your interior house a new look and refinement it deserves. But this is not as easy job as it looks. Here are some tips on how to paint crown molding in a professional way. Best way to paint crown molding. There are some. The caulking before painting is a good idea but you don't need time consuming and expensive blue tape. Apply the caulk and use a wet rag to smooth it off. Then, paint the ceiling and use ceiling color to paint over the caulking, don't worry about getting it on the wall. How to DIY install crown molding and faux wainscoting « anything. I've been painting and doing millwork for 20 years. The whole point of caulking is to create a smooth transition between trim and a wall. You just caulk your line - keep a damp rag on hand and wet your finger to smooth out the bead. This allows you to cut a clean paint line after. You could use tape at this point once the caulk is dry Or try scraping out the caulk, to eliminate the messy-looking tears in the caulking and paint. Then just let the cracks be where they are. After all, the beauty of crown molding is mostly in.

Crown Molding Ideas

Tips for Painting Crown Molding DoItYourself

Next after your trim wood has acclimated for a few days the wood can be stained and varnished or sealed before installation. It's important to acclimate the wood before staining so a little preparation is required for good trim work. Have all the trim wood, doors, everything totally finished In our opinion, NPC Solar Seal 900, Quad by OSI or Geocel 2300 are all excellent solvent based paintable sealants. Since they contain solvent they must be fully cured before painting. Typically 24 hours before painting. The next best are polyurethane sealants. Polyurethane is very compatible with PVC and bonds well to PVC trim 3-Day Project: Molding and Paint. August 29, 2018 Riverside Retreat, DIY Projects. Just in time for Labor Day Weekend, I've teamed up with Lowe's to bring you a DIY project you can tackle over the holiday while you still have those extra daylight hours. I'm excited to announce that this is the first of many sponsored projects I'll be. To make sure you have no gaps in your crown molding, here are 15 easy steps you can take to correctly fill in the joints in crown molding: Cut your first piece of crown molding and put it on the wall. You may want to cut it at 0 degrees with a 30-degree bevel. For the backing, get a piece of flat wood scrap smaller than the crown molding Before you begin painting, check to make sure that no gaps have formed between your molding and the wall. If there are any gaps that have formed, fill them in with an acrylic based caulk. After the caulk has dried and the gaps have been filled, you can move onto the next step

Quick Tip: When to Use Spackling and When to Use Caulk on

Paint it After Source. On the other hand, there are many experts that advocate for painting it after it is installed. There are a few reasons for this. It might take more time to paint it afterward, but you don't have to worry about how you're going to cover up the nails, caulk, and scuff marks when you paint the trim after the fact. Slide it in the miter saw in the same manner as the previous piece. Turn the blade of the saw to half of the recorded measurement. For a 90-degree angle, turn the saw to 45 degrees for the first corner piece. Cut through the molding at the exact mark. Do this with both pieces of molding — cutting the next piece at the opposite angle Caulk failures occur for a variety of reasons. One of the main reasons is failure to use a quality caulk. Caulk that is of poor quality does not have the ability to stretch and flex. It will harden and continue to lose elasticity as time goes on. Tips for Caulking on a Quality Home Painting Project [ Paint moldings before you install them — especially crown molding — ever! Caulk moldings before you prime them; Overview: How to Paint a Room With Moldings. Two coats of paint on trim, ceiling and walls. Start from the top and then work your way down. Paint the crown two coats; Cut in the ceiling; Roll the ceiling; Repeat steps 2 and 3 for. Let the caulk dry completely before continuing. Painting over the caulk is the easiest way to cover up any carpentry mistakes that may have been made prior to or during installation. 2 Tape off the edges of the crown moulding. The paint should not end up on the wall or ceiling close to the moulding

After you cut and nail your pieces in place, use caulk to fill in any mess ups or gaps and to make a seamless finish between where the bookshelf or wall ends and the crown molding begins. TIP: smoothing the caulk with wet fingers after it's applied will get all the excess caulk off and will make the caulk ultra smooth for a clean finish For wood trim, caulk should be used anywhere 2 surfaces meet - like, where 2 boards meet, where boards and a wall or ceiling meet, or where boards and molding meets. Caulk can start drying pretty fast, so work in small sections. And, always be sure to wipe away excess caulk before it dries. Caulk cannot be sanded or easily removed, once dry

CAULK CROWN MOLDING AND SHELVES. To give it a finished look, Jason caulked the seams. We did have to hammer in a few nails to secure the back panel board to each shelf before caulking the shelves to the back panel. It was bowing so bad that caulk alone wouldn't do the trick There are 6 styles of the flat back crown molding to choose from (link), and sizes (3 1/2 , 4 1/2 and 6 inches). I picked style number 6 in flat back crown molding. Normally a room my size with 8-foot ceilings would call for 4 1/2 -inch crown molding, but I decided to take a design risk and go with really oversized 6 inch crown. I was a little. Things to consider before installing your crown molding. It is recommended that you paint after installation since the caulk that you'll by using to help secure the molding to the wall will push through the joints and may create some white areas within the crown molding gaps. You'll also be using the caulk to cover the nail/screw holes. Latex caulk is most commonly used on drywall and wood. Latex caulk fills in gaps between crown molding and baseboards. A latex-based sealant will break down if constantly exposed to water. Latex caulk is easier to apply and correct than sticky pure silicone. However, it is less moisture-resistant and more likely to crack with thermal expansion. Painting and caulking crown is one of those things I put off, but when it's done I can't believe the difference it makes. Here's the before: And the after - bright white and look Ma! No gaps!: You'll notice the wood planks have been painted too, halleluiah! Now I feel like I'm really in the home stretch

Style 6 Fairchild 5

How to Fix Gaps in Crown Molding - Sawdust Girl

  1. How To Repair and Caulk Baseboards Step-by-Step. Step 1 - Begin by scraping off the old caulk. I love this caulk scraper because it won't gouge the wall or tile. Scrape or sand any excess texture off to create a smooth surface. Step 2- (Optional) Tape off the wall. I like to tape the front of the baseboard over the edge
  2. This includes all crown molding, baseboard, or other molding surface installs, our siding install, and various other useful applications for the Big Stretch. It has worked flawlessly since we first installed it on our dining room crown molding. The dining room crown was installed in October 2004 and is still crack free almost seven years later
  3. Before you install crown molding it is best to sand, prime and paint. This saves a lot of work trying to cut-in along the walls or base. If you've already installed crown molding, it is best to tape off the surrounding wall and use a drop cloth since work is being performed overhead, then sand and prime the molding for paint
  4. Most caulk used around the home is paintable acrylic caulk. After drying, this caulk will accept paint and the paint will adhere very well to the caulk. Non-paintable caulk, usually 100% silicone, cannot be painted. It should not be used next to walls, mouldings or any surface that may be painted. Paint will not adhere to 100% silicone caulk
  5. There are only a few items required to prep wood trim for painting: a putty knife to scrape peeling paint and apply fillers. a paint scraper for rough oil-based paint. sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste. acrylic latex caulk and a caulk gun to fill gaps. painter's putty to fill small nail holes
  6. USE THE RIGHT SEALANT BEFORE YOU PAINT MOLDING AND TRIM FOR BEAUTIFUL RESULTS. For these kinds of projects, Max ™ Shield Painter's Siliconized Acrylic Latex Sealant is an excellent choice, ideal for tough paint projects both indoors and outdoors. This best-in-class † paintable sealant offers durable, long-lasting results, backed by Tri-Shield Protection: extreme flexibility, 100%.

How to Caulk Cracks Between Molding & the Ceiling Home

Tips For Installing Beautiful (Almost Flawless) Trim Moulding

House Remodel: Caulking Crown Molding - YouTub

  1. Load Caulking Gun. Once your crown molding is tacked to the wall and ready for finishing, it's time to apply the caulk. Hold the caulking gun by the handle and with your thumb, press the steel rod release and pull the rod all the way back.Cut Off Tip
  2. utes, you can paint your molding. Make sure to paint the caulked areas as well to have everything match
  3. After the crown molding has been nailed to the wall, take your caulk gun and apply caulk from one side of the molding to the other side. Follow the same procedure for the top and bottom. If you're tempted to add caulk to the nail holes, stop yourself; once the caulk dries, that'll leave noticeable dents on the wall after you paint over it
  4. If you are painting the tiles after, make sure to caulk the seams and let the caulk dry for couple of hours at least. time to install the full tiles as it will take you to measure and cut to fit the perimeter tiles if you install the crown molding before the tiles
How to Paint Crown Molding | George Apap PaintingTeen Bedroom Day 5: Ceiling Finish Work and Paint PrepInstalling Crown Molding - Maison de PaxPrepping and painting after Wallpaper removal - RamsdenOh, what a feeling, we got a barn board wooden ceiling

After you install the crown, Use the crown as a guide and a 1 scraper to go around the ceiling one more time so that you are creating a 1 border on the ceiling. The border is not going to be flat like DW, it will still have a little texture to it. Then you caulk and paint (paint finish I assume) Customers ask us all the time about if they should paint first or install their flooring and/or baseboards first. Here's a question we received through email and the answer we gave: Question. Should I paint first or install my baseboards? I for sure would paint the ceiling and walls before installing new floorings The most difficult task for this repair is removing the crown molding. This can take patience. It is important to go slow and work the crown molding from the wall a little at a time. Going too fast or applying too much pressure at once could potentially cause more damage. After the molding is removed, the magic happens